MQ-PRO bluetooth dont work

[lucas.dnsf]

Im using Armbian, i need use bluetooth, but I couldn’t make it work.
I tested this two topics:

Enabling bluetooth on MQ-Quad

I’m trying to get bluetooth working on the armbian build for MQ-Quad. I first figured out that the bt connection is on UART1 which was not enabled in the device tree. I hacked together an overlay to enable it and it now successfully configures UART1 as /dev/ttyS1. I then got source for rtk_hciattach and tried attaching to ttyS1, but it failed since it needed firmware for rtl8723ds, which was not included in the image. Once I tracked that down and placed it properly, rtk_hciattach was able to com…

Bluetooth on MQ-Pro

Does anyone know of a Linux image for MQ-Pro where Bluetooth is working? I tried the Armbian image from Armbian on the MangoPi MQ Pro! | Bret's Tech, but it is not working. I could build Tina following the instructions in the mangopi-sbc/Tina-Linux GitHub repo, but I would like to know if Bluetooth is known to work on it before I spend the time. I found https://github.com/lwfinger/rtl8723bs_bt, and thought this might work on the Armbian image, but the problem seems to be that /dev/ttyS1 is not …

Dont work.