Ssh and upmpcli problem

Hello Mango,

I have a problem with my openwrt configuration.

First problem: I can’t reach my widora neo through ssh when connected with the lan port to my router. I changed the network configuration for the lan port to dhcp so it receives a IP from my router, but I can’t ssh into it.

Second problem: I want to reach upmpcli through my home wifi. So when the widora neo is plugged in the home router through ethernet, But upmpcli is not broadcasted through my home router. I tried different interfaces in the upmpcli config, but only the original setting of br-lan works and broadcast through the widora wifi.

In my finished project I don’t need the wifi, only the lan. So I want to disable the wifi. But somewhere it seems connection through lan is blocked as upmpcli and dropbear aren’t reachable through the lan port.

By the way, any change on a openwrt trunk version, so squeezelite is also available thought the openwrt repo?

Dear Mango,

This is my current /etc/config/network:

config interface ‘loopback’
option ifname ‘lo’
option proto ‘static’
option ipaddr ‘’
option netmask ‘’

config globals ‘globals’
option ula_prefix ‘fdd7:5048:aea1::/48’

config interface ‘wan’
option ifname ‘eth0’

option macaddr ‘0c:ef:af:d0:13:4b’

option proto 'dhcp'

option ip6assign ‘60’

I already tried different version without succes. I disabled also the firewall:

/etc/init.d/firewall stop
/etc/init.d/firewall disable

What I want to achieve is that the widora works as a client on the system so not as a router, but in fact as a regular pc. I want to reach it over the network through ssh and it should work with upmpcli as a pnp renderer and with squeezelite as a squeezebox client connected to my amplifier (old Kenwood KR5400).

Looks like a firewall issue, but I have to look at your /etc/config/network file.